banner



Home  ›  How To Fix Ohms Too High Novo X

How To Fix Ohms Too High Novo X

Written By Wednesday, January 4, 2023 Add Comment Edit

Download Article

Download Article

Is your SMOK vape acting up? Whether you want to reset the puff counter, fix errors about ohms being too loftier or low, or endeavor to restore your SMOK box modernistic back to its original manufactory settings, we can help! This wikiHow tutorial volition teach you lot 4 easy ways to reset the most popular SMOK advanced mods and pod mods, and show you how to perform a manufactory reset and firmware update on mods like the Mag, K-Priv and Morph.

Things You Should Know

  • If you're getting "ohms as well high" or "ohms too low" errors, remove the tank, clean the 510 connectors, and printing the burn down button to reset the resistance.
  • To reset the puff count, select Puff Clear or Puff Reset from the menu, or press the Fire and Down buttons, depending on your model.
  • Almost mods can be reset to manufacturing plant defaults by removing the battery and pressing the Upwardly and Downwardly buttons together.

  1. 1

    Remove the tank from your mod. If you lot're getting the "ohms too depression" or "ohms likewise high" error even when using the recommended wattage for your roll, you can normally fix the fault by removing the tank to reset resistance detection.

  2. 2

    Clean the connectors. If y'all haven't already done so, make certain the 510 connectors are clean and dry, and that no e-juice is on the exterior of the tank.[1]

    • To clean your 510 connectors, dip a cotton wool swab into isopropyl alcohol, and gently swab away whatsoever e-liquid buildup and condensation gunk from the pins and connection points.[2]

    Advertisement

  3. 3

    Press the Fire button with the tank removed. But printing the button a single time—don't press and hold.

  4. 4

    Place the tank bank in the mod. Once detected, you'll be asked if you lot've inserted a new scroll.

  5. 5

    Select N . This final step erases the resistance memory recorded from the previous tank.

    • If you're even so getting resistance/ohm errors, make sure the screws are tight if yous're using the RBA whorl.
    • If possible, endeavor inserting the tank into another mod to come across if the same problem occurs. If the tank works in another device, the problem is not the tank. Similarly, try inserting a different tank into your main modernistic.

    6. Ad

  1. ane

    Open your mod'south Settings bill of fare. If yous want to reset your puff count to 0, you tin can do then in your settings.

    • If your SMOK mod has a touch screen (like the SMOK G-Priv two), you can tap the settings icon or Menu on the home screen.[3]
    • For other mods, including the SMOK Alien, Mag, Ten-Priv, and Procolor, printing the Fire button 3 times to open the card.[4]
    • For mods without elaborate full-screen menus, including the SMOK Nord, Morph 2, Scar, RPM, & Rigel, you tin can reset the puff counter past pressing the Fire and Down (left) buttons at the same fourth dimension.

  2. ii

    Navigate to the Puff Settings or Puff carte du jour. Depending on your modern, you can get there by pressing the navigational buttons or past pressing the Fire push button to click through each menus.

  3. 3

    Select Puff Clear or Puff Reset . The procedure might be a little dissimilar depending on your mod, but on the SMOK Alien, Mag, and Procolor, you can press and hold the Burn down button until "Puff Clear" or "Puff Reset" is active.[five]

  4. four

    Select Yep . You tin do this by pressing or borer the Upwards push to change the value of the menu and and so pressing the Fire button once again to select. This resets your puff count to 0.

    • If your mod displays "max puff" or "puff over" errors once you reach a certain puff count, you'll also have the choice of increasing the puff setting or placing your vaping plan into Never way.[6]

    5. Advertisement

  1. 1

    Remove the batteries from your mod. If y'all need to reset your SMOK modernistic, you can usually practise so by removing the battery and pressing a combination of keys while the battery door is open.

    • The steps may vary slightly by model, but should work on some of the more popular models including Conflicting, Procolor, Magazine, Veneno, E-Priv, and X-Priv.

  2. two

    Printing and hold all physical buttons on the mod. Keep the bombardment compartment door open up while you do this.

    • For some models, including Veneno and Alien, y'all should only take to hold downwardly the Up and Downward buttons. Other models may also require you to printing the Burn push button at the same time.

  3. 3

    Reinsert the batteries. If this does non factory reset your modern, repeat the process while your modernistic is connected to your estimator with a USB information transfer cablevision.

    • Some mods may automatically reset if you exit the batteries out for an extended period of time.

    4. Advertisement

  1. 1

    Download the firmware update for your modern. If you need to install new firmware on your mod, yous'll take to get the firmware update from SMOK. Virtually firmware download links are no longer available on SMOK's website, so you'll need to ship an email to support@smoktech.com to request a firmware download link.[7]

    • Near people will non need to update the firmware unless SMOK notifies yous that an update is bachelor.[8]
    • If your device has firmware that can be updated, you'll typically see the firmware version on the screen right when you lot ability up the mod. Make sure you're downloading a later version of the firmware than what you have now.
    • There are still two firmware download links available on SMOK's website:
      • Alien: https://www.smoktech.com/faq/270
      • G-Priv2: Visit https://world wide web.smoktech.com/faq/365
    • The package you lot download contains NuMicro ISP Programming Tool, the firmware updating tool, and the actual firmware for your model. Don't try to install another mod's firmware on your mod, as you lot tin can permanently destroy it.

  2. 2

    Remove the bombardment from your mod. For the Alien and G-Priv2 updates, you will need to remove the battery. Other models might be different—inquire for specific instructions when yous receive your update from SMOK customer support.

  3. 3

    Unzip the firmware files. You can easily unzip the parcel by right-clicking the file, selecting Extract All, choosing a location, and then clicking Extract.

  4. 4

    Connect your SMOK modernistic to a Windows PC with a USB cable. There's no firmware update software available for macOS, so you'll need access to a Windows PC to do the update. To properly connect:

    • Connect i end of the cable to the mod.
    • Press and hold the Fire button as y'all plug the other cease of the cable into the figurer. According to SMOK's instructions, you'll also demand to keep holding the Fire button while you perform the unabridged upgrade, though some Reddit users were able to update without holding the button.[nine]
    • If you lot don't accept the USB cable that came with your mod, you'll need to make sure you're using a USB cable that has data transfer capabilities. If the cablevision can only accuse your modern, it won't work.

  5. 5

    Open the extracted binder and double-click NuMicro ISP Programming Tool . This launches the tool you'll use to do the update.

  6. 6

    Click Connect . If this doesn't work, make sure you're holding down the Fire push as y'all click Connect.

  7. 7

    Click APROM . You'll see this push on the left side.

  8. 8

    Select the file that ends with .bin. This is the actual firmware update file.

  9. 9

    Check the boxes next to "APROM" and "Config" at the bottom of the upgrade tool. These should be the only options selected at the bottom of the tool unless otherwise specified.[10]

  10. 10

    Click Start . Once again, try holding down the Fire push every bit y'all do this and continuing to hold it throughout the update procedure.

    • Once the firmware is updated, you lot'll see "PASS" at the bottom. At this point, you tin can close the tool and replace the batteries in your mod.

    11. Advertizing

Inquire a Question

200 characters left

Include your email address to go a bulletin when this question is answered.

Submit

Advert

Nearly This Article

Thanks to all authors for creating a folio that has been read fourteen,625 times.

Did this commodity help you?

Source: https://www.wikihow.com/Reset-Smok-Mod

0 Response to "How To Fix Ohms Too High Novo X"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel